Electronics Engineer

Our pipeline is full of customers — defence primes, armed forces, industrial operators — who want our RU in their hands. Demand is ahead of us. Our job now is to turn boards into working hardware, fast, and ship them.

Our electronics team today is two people: a Senior RF Engineer who owns design and architecture, and a Junior Embedded Engineer on power, PCB, and embedded. We need a third pair of hands on the bench — someone who can build, rework, test, and troubleshoot microwave radio hardware across our product range, and operate independently while doing it.

That's the job. You'll be the person who turns boards into working hardware and tells the design team what reality looks like.

What you'll actually do

• Bring up new PCB revisions: power-on, functional test, characterisation against spec.

• Solder and rework fine-pitch SMD and RF components, including QFN. Modify boards when a design change needs testing before a respin.

• Run RF and microwave measurements on the bench — VNA, spectrum analyser, signal generator, oscilloscope — and interpret what you see.

• Troubleshoot hardware failures methodically. Isolate the fault, narrow it down, document what you found.

• Feed observations back to the design team in a way that's useful — clear notes, photos, structured data, not just "it doesn't work."

What we're looking for

You should be credibly strong on most of the must-haves:

• Confident solderer. Fine-pitch SMD, QFN, rework of RF components — you've done this and you're good at it.

• Comfortable with RF/microwave test equipment. VNA, spectrum analyser, signal generator, oscilloscope. You set them up, calibrate them, and trust the results.

• Enough RF/microwave understanding to troubleshoot without a script. You recognise unexpected spurs, you know what a PLL lock failure looks like, you can tell a real signal from a measurement artefact.

• Systematic troubleshooting. You isolate faults methodically and explain how you got there.

• 3–5 years in a hands-on lab or bring-up role.

Nice-to-haves:

• Serial protocol debugging (SPI, I2C, UART).

• FPGA boards or high-speed digital hardware (ADC/DAC, Ethernet).

• Gimbal or motor system experience.

Apply asap, we interview on a daily basis.